Rode Microphones - M3 Multi-Powered Small Diaphragm Condenser Microphone
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.
Heavy duty metal body
Internal capsule shock mount
High level of RF rejection
On mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
Heat treated high-strength mesh head
Battery status indicator
9V Battery Power and 24 - 48V phantom power
Includes wind sheild, mic clip and zip pouch
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Address Type End
Frequency Range 40Hz - 20kHz(selected HPF @80Hz)
Output Impedance 200Ω
Maximum SPL 142dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 9.2dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 21dB-A
Dimensions 225.00mmH x 33.00mmW x 33.00mmD